| MODEL | GL –200A | GL – 300A | GL – 400A | GL – 500A | GL – 600A | ||
| Material Width (mm) | 200 | 300 | 400 | 500 | 600 | ||
| Material Thickness (mm) | 0.5~4.5 | ||||||
| Max. Coil Weight (kg) | 1000 | 1000 | 2000 | 2000 | 3000 | ||
| Coil O.D. (mm) | Φ1200 | ||||||
| Coil I.D (mm) | Φ450~530 | ||||||
| Mandrel Expansion | Manual/Hydraulic | ||||||
| Pinch Rolls (group) | Φ98×2 Φ120×2 | ||||||
| Straightening Rolls | Φ60×7 (Upper 3/Lower 4) | ||||||
| Input Power | 3Phase AC 380V/415V | ||||||
| Reducer Ratio | 1/30 | ||||||
This model can be customized according to your material width, coil inner diameter, coil outer diameter and coil weight.
* The contents are subject to change without prior notice.
* The contents are subject to change without prior notice.
Introduction
- Suit for most of coiled materials, including HR, CR, aluminium, stainless steel, plastic, etc.
- GL models save space and increase productivity by combining decoiler and straightener.
- Coil is centered by manual or hydraulic expansion of the jaws.
- Non-motorized decoiler is used with straightener equipped with powered rolls that have sufficient power to feed the strip.
- Equipped with 11 rolls including 7 straightening rolls and 4 pinch rolls, GL models are available with material thickness from 0.5 to 4.5mm.
- Rolls are heat-treated alloy steel with hard chrome plating and precision ground, which have high-hardness and anti-friction features.
- Equipped with Japanese electromagnetic contactor and electronic components, GL models have fewer breakdowns and longer lifetime.
- Press arm prevents coil from loosening. (option)
- Equipped with inverter, GL models use a manually adjustable speed control knob to make the operator set the payoff speed. (option)
- Custom and application specific solution is available.
Optional Accessories
- Hydraulic expansion of decoiler mandrel
- Decoiler with AC Motor
- Motorized decoiler with Inverter
- Pneumatic press arm
- Motorized straightener with Inverter
