| MODEL | DSL –100A | DSL – 150A | DSL – 200A | DSL – 300A | ||
| Material Width (mm) | 100 | 150 | 200 | 300 | ||
| Material Thickness (mm) | 0.1~0.6 | |||||
| Adjust Method | Four point adjustment separately | |||||
| Max. Feedspeed (m/min) | 16 | |||||
| Direction | Left to right | |||||
| Input Power | AC: 200V/380V/415V/440V | |||||
*The contents are subject to change without prior notice.
Features
- It adopts 2 sects leveling, on the leveling process, the roll material only be leveled the start sect and the end sect, the middle sect don't need to be leveled, it can make the whole material keeping in a same surface.
- It's hard to finish the good electric product if the material does not clear up the inner stress. The only way to make the better electric product is using the straightener to remove the inner stress.
- After straightening, materials can be corrected upward or downward of the flat.
- The Perlin roll in both sides of the roll adopted the design of oil type that is no need to lubricate that can get rid of the trouble of oil and the dirty.
- The driving unit is controller by inverters(cycle control), can feed smoothly at a speed synchronize with the press.
