| MODEL | MT –200 | MT – 300 | MT – 400 | MT – 500 | MT – 600 | MT – 700 | MT – 800 | ||
| Material Width (mm) | 200 | 300 | 400 | 500 | 600 | 700 | 800 | ||
| Material Thickness (mm) | 0.2~6.0 | ||||||||
| Max. Coil Weight (kg) | 500 | 1000 | 2000 | 2000 | 3000 | 3000 | 3000 | ||
| Coil O.D. (mm) | Φ1200 | ||||||||
| Coil I.D (mm) | Φ450~530 | ||||||||
| Mandrel Expansion | Manual/Hydraulic | ||||||||
| Max. Feed Speed (m/min) | 15 | ||||||||
| Input Power | 3Phase AC 380V/415V | ||||||||
* The contents are subject to change without prior notice.
Introduction
Bansal Decoiler can be matched with straighteners and feeders to become a complete coil feeding system with a wide range of material width and coil weight capabilities. Small or Large, Manual or Hydraulic, Powered or Unpowered types are available.
Option
- Pneumatic press arm
- Hydraulic expansion of decoiler mandrel
- AC motor with Inverter
Features
- Suit for most of coiled materials, including HR, CR, aluminium, stainless steel, galvanized steel, plastic, etc.
- Apply to progressive press of various hardware, electronics, and auto parts.
- Simple but rugged construction allows a longer lifetime without maintenance.
- A stable base on the bottom allows moving the decoiler around with the fork lift.
- Coils are centered by manual or hydraulic expansion of the jaws.
- Coils are automatically centered by hydraulic expansion of mandrel, which makes coil loading quick and safe. (Option)
- The spindle is reinforced to improve load capacity up to 3000kg.
- Unpowered decoilers are provided with brake to prevent coils overrun.
- Powered versions use loop control to start and stop the drive motor and smoothly deliver material to automatic feeding equipment.
- Decoiler press arm prevents coil from loosening. (Option)
- Custom and application specific solution is available.
